● Continuous feeding & discharge, user don’t have to break vacuum.
● Short residence time.
● High evaporation rates.
● Low processing temperatures.
● Compact design.
● Automatic control.
SMD-A Series
Lower Cost Solution, Wide Application, Suitable for Separation & Purification of Most Materials.
● The Lowest Cost to Meet the Requirements of Laboratory R&D Stage.
● High Vacuum (0.01mbar/1Pa), Suitable for Separation and Purification of Most Materials.
● Because Thermal Conductivity of Stainless Steel is Better, The General Processing Capacity of Stainless Steel Equipment with The Same Specifications Is Greater Than Glass Equipment.
● No-Stop Continuous Feeding, Continuous Receiving to Test The Performance of Materials in Different Conditions.
● Compact Design, Firm & Durable, Installation Space Saving. Removable Whole Set, Convenient Operation.
SMD-B Series
High Efficiency Solution, Suitable for Separation & Purification of High Melting Point, High Boiling Point Materials .
● Upgrade the Condensing System, Improve the Vacuum & Distillation Temperature.
● High Vacuum (0.001mbar/0.1Pa) & High Distillation Temperature (300°C), Suitable for Separation and Purification of Materials with High Melting Point and High Boiling Point.
● Completed Closed High Temperature Circulator, Smokeless and No Smell, No Pollution.
● Dual Condensation System, Not Only with Fractionation Distillation, But also can Effective Protect Vacuum System.
● No-Stop Continuous Feeding, Continuous Receiving to Test The Performance of Materials in Different Conditions.
SMD-C1 Series
Fully Jacketed Thermal Insulation & Automatic Feeding/Receiving Solution, Suitable for Heat Sensitive, Good Fluidity of Neutral Materials.
● Upgrade to Full Jacket and Heating Tracing of the Whole Process. Automatic Continuous Feeding & Discharging.
● Feed Pretreatment Adopts Heating Plate Instantaneous Heating, Which Is Suitable for Neutral Materials with Heat Sensitivity & Good Fluidity.
● Completed Closed High Temperature Circulator, Smokeless and No Smell, No Pollution.
● Dual Condensation System, The Closed Type Coil Cold Trap Instead of Traditional Open Cold Trap to Reduce The Consumption.
● Continuous Feeding and Discharging, Maintain the System Constant Vacuum, Realize Pilot Scaled Continuous Production.
SMD-C2 Series
Fully Jacketed Thermal Insulation & Automatic Feeding/Receiving Solution, Suitable for High viscosity, High Melting Point, High Boiling Point Materials.
● Upgrade to Full Jacket and Heating Tracing of the Whole Process. Automatic Continuous Feeding & Discharging.
● Heating Tracing During the Whole Process, Suitable for Materials with High Viscosity, High Melting Point and High Boiling Point.
● High Power Discharing Gear Pump with Heat Preservation, Avoid Coking & Blocking.
● Completed Closed High Temperature Circulator, Smokeless and No Smell, No Pollution.
● Dual Condensation System, The Closed Type Coil Cold Trap Instead of Traditional Open Cold Trap to Reduce The Consumption.
● Continuous Feeding and Discharging, Maintain the System Constant Vacuum, Realize Pilot Scaled Continuous Production.
SMD-Plus Series
New Upgrade Solution, Suitable for All Materials.
● Heating Tracing During the Whole Process, Suitable for Materials with High Viscosity, High Melting Point and High Boiling Point.
● New Design Structure, Lower Feeding Height, More Convenient for Operation.
● Enlarge the Feeding Tank Capacity, Saving the Pretreatment Time.
● Equipped with Mini-Adjustable Vacuum Valve, User can Adjust The Vacuum Degree in Real Time.
● Variety of Optional Vacuum Configurations, Such as Diffusion Pump, Turbo Molecular Pump, Roots Pump, Dry Screw Vacuum Pump, Etc., to Adapt to All Kinds of Materials.
| Model |
SMD-60 |
SMD-80 |
SMD-100 |
SMD-150 |
SMD-200 |
SMD-230 |
| Barel Diameter (mm) |
60 |
80 |
100 |
150 |
200 |
230 |
| Effective Evaporation Area (㎡) |
0.06 |
0.1 |
0.15 |
0.25 |
0.35 |
0.5 |
| Feeding Rate (kg/h) |
0.1~3 |
0.1~5 |
0.2~7 |
0.5~9 |
0.5~16 |
0.5~26 |
| Feeding Tank Volume (L) |
1.5 |
1.5 |
1.5 |
2 |
5 |
5 |
| Distillate Receiving Flask (L) |
1 |
1 |
2 |
5 |
10 |
10 |
| Residue Receiving Flask (L) |
1 |
1 |
2 |
5 |
10 |
10 |
| Motor Power (W) |
120 |
120 |
120 |
120 |
120 |
200 |
| Rotation Speed (PRM) |
450 |
450 |
450 |
450 |
300 |
300 |
| Designed No-loading Vacuum |
0.001 mbar |
| Operation Temperature |
Up to 300℃ |
| Power Supply |
220V/50~60Hz (Other Options Can Be Provided) |