Glass Wiped Film Molecular Distillation Equipment

● High evaporation efficiency and reduced retention time, with minimal time delay. ● Short path distilation is ade from high borosiicate glass 3.3 and PTFE, which have excellent corrosion resistance. ● Main body of Short path distilation is made of high boroslicate glass 3.3, allowing the whole process to be observed very clearly. ● High-precision distilation barel allows the iquid to form a complete and unifed thin film on the heated surface. The smooth inneisurface. avoid stick and scaling. ● Higher efficiency distillation, the distance between distilation surface and condenser surface is shorter to 18mm. ● German technology brand frequency conversion deceleration motor, with self-cooling fan, long time continuous working. ● Magnetic force transmission make film forming syster separate from motor, the top sealing of distilation barrel have no dwangthrough. The whole System performs a completed sealing. Min Vacuum degree can reach 1Pa. ● Highest temperature of the system can reach 260'C, accurate temperature control can be realized.

GMD-A Series Lower Cost Solution, Wide Application, Suitable for Separation & Purification of Most Materials. ● The Lowest Cost to Meet the Requirements of Laboratory R&D Stage. ● High Vacuum (0.01mbar/1Pa), Suitable for Separation and Purification of Most Materials. ● Visible the Whole Working Process,Experiments Condition Can be Adjusted In Time to Save Users' Precious Time. ● No-Stop Continuous Feeding, Continuous Receiving to Test The Performance of Materials in Different Conditions. ● Compact Design, Installation Space Saving. Removable Whole Set, Convenient Operation.

GMD-B Series High Efficiency Solution, Suitable for Separation & Purification of High Melting Point, High Boiling Point Materials. ● Upgrade the Condensing System, Improve the Vacuum & Distillation Temperature. ● High Vacuum (0.001mbar/0.1Pa) & High Distillation Temperature (300°C), Suitable for Separation and Purification of Materials with High Melting Point and High Boiling Point. ● Completed Closed High Temperature Circulator, Smokeless and No Smell, No Pollution. ● Dual Condensation System, Not Only with Fractionation Distillation, But also can Effective Protect Vacuum System. ● No-Stop Continuous Feeding, Continuous Receiving to Test The Performance of Materials in Different Conditions. GMD-C1 Series Fully Jacketed Thermal Insulation & Automatic Feeding/Receiving Solution, Suitable for Heat Sensitive, Good Fluidity of Neutral Materials. ● Upgrade to Full Jacket and Heating Tracing of the Whole Process. Automatic Continuous Feeding & Discharging. ● Feed Pretreatment Adopts Heating Plate Instantaneous Heating, Which Is Suitable for Neutral Materials with Heat Sensitivity & Good Fluidity. ● Completed Closed High Temperature Circulator, Smokeless and No Smell, No Pollution. ● Dual Condensation System, The Closed Type Coil Cold Trap Instead of Traditional Open Cold Trap to Reduce The Consumption. ● Continuous Feeding and Discharging, Maintain the System Constant Vacuum, Realize Pilot Scaled Continuous Production. GMD-C2 Series Fully Jacketed Thermal Insulation & Automatic Feeding/Receiving Solution, Suitable for High viscosity, High Melting Point, High Boiling Point Materials. ● Upgrade to Full Jacket and Heating Tracing of the Whole Process. Automatic Continuous Feeding & Discharging. ● Heating Tracing During the Whole Process, Suitable for Materials with High Viscosity, High Melting Point and High Boiling Point. ● High Power Disc-haring Gear Pump with Heat Preservation, Avoid Coking & Blocking. ● Completed Closed High Temperature Circulator, Smokeless and No Smell, No Pollution. ● Dual Condensation System, The Closed Type Coil Cold Trap Instead of Traditional Open Cold Trap to Reduce The Consumption. ● Continuous Feeding and Discharging, Maintain the System Constant Vacuum, Realize Pilot Scaled Continuous Production. GMD-Plus Series New Upgrade Solution, Suitable for All Materials. ● Heating Tracing During the Whole Process, Suitable for Materials with High Viscosity, High Melting Point and High Boiling Point ● New Design Structure, Lower Feeding Height, More Convenient for Operation ● Enlarge the Feeding Tank Capacity, Saving the Pretreatment Time ● Equipped with Mini-Adjustable Vacuum Valve, User can Adjust The Vacuum Degree in Real Time ● Variety of Optional Vacuum Configurations, Such as Diffusion Pump, Turbo Molecular Pump, Roots Pump, Dry Screw Vacuum Pump, Etc., to Adapt to All Kinds of Materials

Model	GMD-60	GMD-80	GMD-100	GMD-150	GMD-200	GMD-230
Barel Diameter (mm)	60	80	100	150	200	230
Effective Evaporation Area (m²)	0.06	0.1	0.15	0.25	0.35	0.5
Feeding Rate (kg/h)	0.1~2	0.1~4	0.2~6	0.5~8	0.5~15	0.5~25
Feeding Flask Volume (L)	1.5	1.5	1.5	2	5	5
Distillate Receiving Flask (L)	1	1	2	5	10	10
Residue Receiving Flask (L)	1	1	2	5	10	10
Motor Power (W)	120	120	120	120	120	200
Rotation Speed (PRM)	450	450	450	450	300	300
Designed No-loading Vacuum	0.001 mbar
Operation Temperature	Up to 300°C
Power Supply	220V/50~60Hz (Other Options Can Be Provided)